Managed DSLS enrollment steps

Managed DSLS enrollment steps

Question:
How do I set up my Managed DSLS properly? Is there anything I need to do in a particular order?

Answer:
Managed DSLS is a free service offered for customers with active maintenance contract.

Note that the Managed DSLS setup involves 2 crucial steps:

1. Managed DSLS local set up on the customer side
2. License feature granting on DS side


Step 1: 
General enrollment process on the customer side is shown in the email sent to the point of contact on the customer side. Note that in this email you will also see a text file i.e. ATT00001.txt and a .LIC authentification file with a name similar to this ABCDE-FGHIJ-KLMNO-PQRST-UVWXY_000_1.LIC . The email should look like the following: 

Dear John Doe,

Your Managed Licensing Service from Dassault Systèmes (LKO1234567) is now ready to use. The following steps should be performed by a network administrator. If you are not such a person, please forward this email.

BEFORE YOU BEGIN

Configure your network (firewalls) to allow https access on port 443 to the following 3 urls:

r1234567890123-us1-licensing.3dexperience.3ds.com

r1234567890123-us1-licensing-1.3dexperience.3ds.com

r1234567890123-us1-licensing-2.3dexperience.3ds.com

GETTING STARTED WITH YOUR 3DEXPERIENCE PLATFORM

1. Access
Attached to this email you can find your Company authentication file:
ABCDE-FGHIJ-KLMNO-PQRST-UVWXY_000_1.LIC
Detach this file and copy it to every computer on which a Dassault Systemes application will run. On Windows computers, it has to be stored in C:\ProgramData\DassaultSystemes\Licenses folder. On UNIX computers, it has to be stored in /var/DassaultSystemes/Licenses directory.

2. Managed Licensing Service Access
On the same computers, a file referencing the Managed Licensing Service has to be present in the same location as your Company authentication file.
Its filename is: DSLicSrv.txt
Its content is only 1 line:
r1234567890123-us1-licensing.3dexperience.3ds.com:443,r1234567890123-us1-licensing-1.3dexperience.3ds.com:443,r1234567890123-us1-licensing-2.3dexperience.3ds.com:443
Create this file with your favorite text editor.

3. Advanced Administration Tasks
Some optional license administration tasks, such as setting authorization rules, can be done by entering the following url in your favorite browser:
r1234567890123-us1-licensing-3.3dexperience.3ds.com

4. Managed Licensing Service Update
Your Managed Licensing Service from Dassault Systèmes has been updated upon your request #LKO4427093 for the Dassault Systèmes software described below.

There is 1 key included in 
ABCDE-FGHIJ-KLMNO-PQRST-UVWXY_000_1.LIC
---------------------------------------------

SERVICE UPGRADE INFORMATION
You can be informed of the future Managed Licensing Service upgrades by subscribing to an RSS feed provided by Dassault Systemes.
This action can be done from the following url:
https://www.3ds.com/support/news/?woc=%7B%22support%20category%22%3A%5B%22support%20category%2Fmanaged%20dsls%20maintenance%22%5D%7D



Best Regards,
Dassault Systèmes
www.3ds.com




After completing step 1, your Managed DSLS is set up properly on the customer side.

NOTE: there are NO license feature on the Managed DSLS license at this point. 
If you try to use your purchased software, you will likely be greeted with a message like the one shown below.



To access your license properly. You have to wait for another email in step 2. 



Step 2. 

Depending on the processing speed of the order, the license feature will be added to the Managed DSLS license a few hours to couple days after the above email. When you receive the email with contents similar to the following, your Managed DSLS is fully operational. 

Dear John Doe,

Your Managed Licensing Service from Dassault Systèmes has been updated upon your license key order (order reference number LKO1234567) for the Dassault Systèmes software described below.

 OID: R1234567890123

 Portfolio

 SIMULIA CST Studio Suite

 Release

 CST S2 2026

 Configurations & Products

 S2X (Shareable) 

 License Type

 ManageDSLS

 Target OS

 

 Target ID

  

 Activation Date

 2026-05-05

 Expiration Date

 2027-05-05

 Quantity

 2

 Additional Information

 N/A

 Serial Number

 ABCDE-FGHIJ-KLMNO-PQRST-UVWXY

 

 OID: R1234567890123

 Portfolio

 Simulation

 Release

 3DEXPERIENCE R2026x

 Configurations & Products

 SRU (Token-Based) 

 License Type

 ManageDSLS

 Target OS

 

 Target ID

  

 Activation Date

 2026-05-05

 Expiration Date

 2027-05-05

 Quantity

 44

 Additional Information

 N/A

 Serial Number

 ABCDE-FGHIJ-KLMNO-PQRST-UVWXY

Best Regards,
Dassault Systèmes
At this point, please open your purchased software and select the appropriate licensing options to access the license features. 

If you have any questions, please check out our other FAQ articles in the knowledgebase or send an email to our support team support@vias3d.com and one of our technical staff will be able to assist further.

    • Related Articles

    • Abaqus Installation Guide (DSLS)

      The installation process of Abaqus now includes the other SIMULIA products which includes fe-safe, TOSCA & iSight. The following steps will guide through the general process of installing Abaqus 2023 on a Windows system. The standard Abaqus license ...
    • Beginner's guide to installing DSLS on Linux (RHEL 9.3)

      Steps will be shown to install DSLS on Linux using RHEL 9.3. Note that you will need at least RHEL 8.6 for all the necessary libraries for this to work. Go to https://www.3ds.com/support/software-downloads and download the latest version of DSLS ...
    • Managed DSLS license option

      What is Managed DSLS? Managed DSLS (MDSLS) is a free hosting service provided by Dassault Systemes for active customers with valid maintenance. It supports 3DEXPERIENCE Platform, CATIA V5 products and various SIMULIA products. Access Users can access ...
    • CST Studio Suite Installation Guide

      CST Studio Suite installation media can be downloaded from the DS media site https://software.3ds.com. This site requires you to login with your DS Passport. If you don't already have one, you can create one here. Note that CST Studio Suite is ...
    • Managed DSLS SRU token consumption using command line

      Question: I have access to Abaqus CAE and I know our company uses SRU tokens to run Abaqus jobs. I am not the admin for the license server so how can I know how many SRU tokens we have and how many are available to run jobs? Answer: Without accessing ...