Additional supported Linux distribution for DSLS outside of RedHat and Suse
The officially supported Linux versions for DSLS are RedHat(8.6 or higher) and Suse per the official DSLS installer on the DS download site. We should stick with the officially supported OS when interfacing with customers but these cases here only serve as INTERNAL REFERENCES only since they are not officially supported. Please do not advertise them unless customers ask.
Based on internal testing, the following Linux distributions are known and confirmed to work when installing DSLS.
Ubuntu 22.04.4 LTS
The following libraries were installed to make it work:
ksh
libjpeg
libstdc++6
libmotif
Another Linux OS tested was Linux Mint 20.3 Una, although the exact libraries installed were not documented.
Related Articles
Beginner's guide to installing DSLS on Linux (RHEL 9.3)
Steps will be shown to install DSLS on Linux using RHEL 9.3. Note that you will need at least RHEL 8.6 for all the necessary libraries for this to work. Go to https://www.3ds.com/support/software-downloads and download the latest version of DSLS ...Abaqus Installation Guide (DSLS)
The installation process of Abaqus now includes the other SIMULIA products which includes fe-safe, TOSCA & iSight. The following steps will guide through the general process of installing Abaqus 2023 on a Windows system. The standard Abaqus license ...2026 DSLS installation guide for Windows
This is the 2026 version of the DSLS installation guide. if you have any questions, please reach out to our support team at support@vias3d.com and one of our support engineers will get back to you. CST Studio Suite media is available on the DS media ...DSLS computer ID extraction - Target ID generator
The Dassault Systemes License Server (DSLS) requires a computer ID or target ID of the computer on which the DSLS license key will be installed. To get the computer ID of your computer, please follow the steps below(Windows OS is used as an example ...Switching between License Server Type: DSLS to Flexnet
Server Machine DSLS to Flexnet Browse to C:\SIMULIA\EstProducts\202x\win_b64\SMA\site\EstablishedProductsConfig.ini and open it with a text editor: Change dsls to flex in: LICENSE_SERVER_TYPE=flex And remove ...